Irola yokuhambisa ngesandla yeNayiloni yokuhambisa iirola |GCS

Irola yokuhambisa ngesandla yeNayiloni yokuhambisa iirola |Umfanekiso obonakalisiweyo we-GCS

Inkcazelo emfutshane:

Irola yokuhambisa ngesandlangenxaIrola yokuhambisaI-PP Gravity Roller PHumxhuzulane roller

Irola yomxhuzulane (Ukukhanya Duty Roller) isetyenziswa kakhulu kuzo zonke iintlobo zeshishini, njengomgca wokuvelisa, umgca wokuhlanganisa, umgca wokupakisha, umatshini wokuhambisa kunye ne-logistic strore.

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Ulwazi lweNkampani

UKUTHENGISWA OKUSHISAYO

Iithegi zeMveliso

Ilungele imithwalo ukuya kuthi ga kwi-100 kg, (i-GCS)IiRolo zeGravity Conveyor zivumela uthutho lwasimahla lokuhamba, olusebenzayo nolukhuselekileyo lwempahla kulo naliphi na inqanaba lokusebenza lomgca wokuhambisa.Ukuvelisa intshukumo ngokusebenzisa amandla endalo, abahambisi bomxhuzulane sisisombululo esinoqoqosho sokuphatha izinto ezisetyenziswa kumashishini amaninzi ukuze kube lula kunye nokusebenza.I-shafts elayishiwe entwasahlobo ayiboneleli kuphela ukugcinwa kokungabikho kokuphazamiseka kunye nokufakwa okulula kwaye iqinisekisa unamathiselo olukhuselekileyo kwisakhelo sokuhambisa (isiteshi) sokwandisa i-roller kunye nomsebenzi wokuthwala kunye nokusebenza.Iirola zifumaneka kwi-zinc plated steel, inayiloni, kunye nentsimbi engatyiwayo yokusetyenziswa kokuhlamba.Kucetyiswa ukuba kubekho ubuncinci beeroli ezintathu phantsi kweempahla eziza kuthuthwa nangaliphi na ixesha.Ubungakanani bento ehanjiswayo bunokunceda ekumiseleni i-pitch ye-roller kwindlela yakho yokuhambisa usebenzisa umgaqo we-roller ezintathu.(GCSabavelisi bebhanti yokuhambisa) unokwenza ngokwesiko ukwenza iirola zokuhambisa umxhuzulane ukuya kubude, ububanzi, kunye neemfuno zeshaft.

Iirola zenayiloni zeNH

(UMZEKELO)	(D) mm	(T)	Ubude beRoller.mm	(d) .mm	I-TubeMaterial	UkuQeda komphezulu
NH38	φ38	T=1.0,1.2,1.5	300-1600	φ12	Carbon, Steel Stainless, Steel, PVC	I-Zinc ifakwe, i-Chrome ifakwe
NH50	φ50	T=1.2,1.5	300-1600	φ12
NH60	φ60	T=1.5,2.0	300-1600	φ12,20
NH75	φ75	T=2.0,2.5,3.0	300-1600	φ15
NH80	φ80	T=3.0	300-1600	φ20